Thursday, 27 August 2009
But, what if you're not a servant of the Ruinous Powers, and what some ideas for naming your Space Marine captain, your Cannoness, your Comissar or your Inquisitor? Well, over on the Dark Heresy website, there's a name generator for generating Imperial Gothic names for either gender, in different formats. Try it if you need some inspiration for naming your Imperial characters.
Wednesday, 26 August 2009
Friday, 21 August 2009
Friday, 14 August 2009
The mission was seize ground with 4 objectives, with a spearhead deployment.
My list was my current one:
HQ: Daemon Prince, Mark of Nurgle, Wings, Warptime (175)
Elites: Dreadnought with multi-melta (100)
Elites: 7 Chosen, Icon of Nurgle, 3 flamers, 2 melta guns, rhino (246)
Troops: 7 Plague Marines inc Aspiring Champion with power fist, meltagun, flamer, rhino (251)
Troops: 7 Plague Marines inc Aspiring Champion with power fist, meltagun, plasma gun (226)
Troops: 7 Plague Marines inc Aspiring Champion with power fist, meltagun, plasma gun (226)
Heavy Support: Defiler (150)
Heavy Support: Vindicator (125)
The Ork list was roughly:
Ghazghkull Thraka accompanied by 4 Meganobs in a trukk
5 Nobz in a trukk
Big Mek with a Shokk Attack gun
20 Boyz including a big shoota
20 Boyz including a rokkit launcher
Zagstruck and 5 Storm Boyz
1 Deff Dread
The Orks won the roll to go first and elected to do so. The objectives were close to each baseline. I'd placed mine as close together as possible so I could have units on both objectives supporting each other. I also deployed them a little more forward than I have previously (took a tip from Goatboy talking on 40K Radio a few weeks back) and placed them where I wanted my units to move to rather than where I wanted them to start. The other two were in the Ork deployment zone at opposite sides of that zone.
He deployed a unit of Boyz, the Battlewagon and the Deff Dred close to one objective. The second unit of Boyz and the Shokk Attack Gun were defending the other objective, with the Deffkoptas and two trukks in front of them ready to advance.
My deployment was as close to the edge of my deployment zone as I could and in cover, ready to advance on the two objectives I'd placed. I actually won the roll to steal the initative, and I elected to take it. I'd read the advice of Fritz at Way of Saim-Hann that you're better going second on objective based games and I absolutley agree, but there was so many Orks bunched up together I couldn't resit going first with the intention of dropping large blasts on them from my Vindicator and Defiler. I'd also hoped to pop Ghazghkull's truk, forcing him to walk across the table with his slow and purposeful Meganobz.
Early turns: My Vindicator and Defiler moved up to fire on the big cluster of Boyz, Deffkoptas and trukks. Due to scatter issues, and my Vindicator being out of range of the trukks and so having to fire at the Deffkoptas, I managed to kill two Deffkoptas and 6 or so Boyz, but still not too shabby. My Plague Marines moved up to take the two objectives I'd placed, and they spent the rest of the game getting there and then defending them.
As I'd failed to pop Ghazghkull's trukk, it sped forward. It's occupants jumped out and proceeded to attack my Vindicator, immoblizing it and destroying its Demolisher cannon. In my subsequent turn, the Defiler charged Ghazghkull and his Mega Nobz, and over the next 4 turns destroyed the Mega Nobz and locked Ghazghkull in combat. My opponent was rolling pretty badly, so my Defiler was fortunate enough to last that long. By the time this was over Ghazghkull was too far away to do anything more (and I'd destroyed his trukk by then).
Mid-Game: The Boyz and Battlewagon heading towards my left flank rolled forward a bit but weren't doing much, I guess they were sticking around to hold the objective at the end. My Chosen turned up on turn 3 and rocked yet again. They opened by wrecking the Battlewagon from the relative safety of the Rhino. Next turn, they blew up the Deff Dread, leaving that flank protected only by one mob of Boyz.
In the centre, the other trukk with the Nobz in it attempted to ram my dreadnought (a bad idea in my opinion). The dread performed a death or glory attack and destroy the trukk forcing the Nobz out. In my turn, my Daemon Prince and Dreadnought ripped them apart, killing two, reducing the others to one wound each and routing them.
End-game: My Chosen jumped out of their rhino and destroyed about 15 Boyz with their flamers, followed by the remainder of the squad in the following turn. His Storm Boyz eventually turned up, but got turned over in assault by some nearby Plague Marines. In the centre, my dreadnought went into a blood frenzy, and charged and destroyed the last deffkopta. In the final turn my Chosen ran over to the objective closest to them (one of the two in the Ork deployment quarter), but not being troops they couldn't hold it anyway but it felt staisfying. The final tally was I held two objectives to his one.
A good game. I had some pretty good luck, and my opponent seemed to be rolling really badly. Gazghkull was well contained by the Defiler and should have destroyed him quickly, with his huge number of attacks, high WS and S10 but it took way too many turns.
The Chosen were awesome again in this battle, I would seriously consider a second squad of these in a future list.
Thursday, 13 August 2009
As you can see from the picture, each side of the template has a different measurement which you are quickly going to use in a game of 40K. The long side is 6" long (assaults, infantry movement, walker movement etc), there's a 2" side (unit coherency), a 1" side to make sure your models and your opponents stay apart by the minimum distance, and a 4" side for vehicle squadron coherency. The other side has a little ruler measured in clear 1" increments for measuring distance when for example a unit is running.
I used it in a game this week. It took a little getting used to, reaching for this template, and not reaching for a tape measure, but once you've done it a couple of times, I found it really helpful. You can pretty quickly measure distances for rapidly moving models, and most importantly, you're measuring accurately. No more stretchy tape measure, going 7" instead of 6" etc, the template gives you the accurate measure.
The template itself is thick plastic, and mine is a much darker blue than the picture above and it's transparent. I did manage to put a scratch on the back of mine, so I'm not sure how long the ruler on the back will last.
So I enjoyed using it, and I found it useful. I wouldn't consider it an essential purchase by any means, but if you've got a bit of spare cash, or need to make up an order to a minimum amount to get free shipping (which is how I ended up with mine) go for it. The cost is £4.50 on Wayland Games, $5.59 from the Warstore.
Wednesday, 12 August 2009
The cost of the spary was a bit cheaper than the Games Workshop spray (mine was £7 or so from Maelstrom Games) and it's actually designed as a primer rather than just being spray paint. I tried the primer out on two Rhinos and two human size minis, and the results were OK. The paint seems pretty thin and the spray is light which gives decent coverage without going on too thick. It also dries really quickly as well, it was touchable within a few minutes of spraying. I tend to leave undercoated minis overnight anyway, but it's a nice bonus.
One thing I would say about it was that on my first attempt, the primer seemed very watery and didn't cover the model that well, especially on the sides on the tanks. I suspect that I hadn't shaken it enough. The can says shake for one minute, which I thought I had, but possibly not. I gave one of the rhinos a second coat after a good long shake of the can which covered better, although of course, now it's a little thick in a couple of places. All trial and error really.
Saturday, 8 August 2009
I'm not going to go into detail much on the battle, just a quick summary, as I want to talk about a couple of new units. It was Annhilation with Dawn of War setup. My list was my all new one with my Nurgle Chosen and Dreadnought. He plays Nurgle CSM's as well, with his list featuring, amongst other things two Land Raiders carrying a squad of terminators and a squad of Bezerkers. It was a really good game and in the end I lost with five kill points to his six.
So this was the first outing for two new units in this list: Chosen and a Dreadnought. I wanted to cover a little bit how I felt each unit did in this game.
Chosen: Awesome. Pure awesome. My opponent deployed two Land Raiders on his base line close to one table edge. I outflanked with my Chosen, who are in a rhino, have an Icon of Nurgle, 3 flamers and two meltaguns. They came in on exactly the side I wanted them, and then immobilized and exploded a Land Raider. The resulting explosion killed a Bezerker who was in the Land Raider. They followed this up by destroying the rest of the Khorne Bezerkers (8 in total) and two terminators. They almost popped the second Land Raider in turn 7 but I missed with the roll. Had they done this, the game would have been a draw. I would consider a second unit of these.
Dreadnought: This unit turned out to be more fun than effective. The first two turns he acted normally, but turn 3 he went into a blood frenzy and charged out of the cover he was in. Next turn he blood frenzied again, only this time my opponents Daemon Prince had moved much closer and proved to be in range (the Dreadnought is fleet when he is blood frenzied). He took a wound from the daemon prince and tied it up for a turn. All in all, he was fun, and I definitely run him again.
Naturally, I'm already planning further tweaks to the list, but I want at least five games with this list before any changes happen.
Friday, 7 August 2009
First up, a lightly converted Nurgle Rhino:
Second up, the first vehicle for my Battle Sisters, a rhino. I've left the turret loose on this one, so I can swap it for an Immolator turret at some point in the future:
And finally, nothing special with this one, an Eversor assassin:
Naturally, they'll be pics when they're painted.
Thursday, 6 August 2009
1st prize: A trip for two to visit Games Workshop HQ, The Studio and Warhammer World, including flights, train fares and hotel accommodation.
2nd prize: Every new product that Games Workshop releases for the next twelve months.
3rd prize: A 5,000 point (game legal) Warhammer or Warhammer 40,000 army of your choice.
Now to me, the second and third prize sound better than the first one, but it's all good stuff.
Wednesday, 5 August 2009
I sanded some milliput, no problems there.
Next, I decided to try and cut some metal with a cutting wheel. Epic fail. The thing wouldn't cut and the mini heated up so hot I couldn't touch it so I ended up having to cut with a saw instead.
Finally, I thought I'd grind some excess metal off which I hadn't been able to cut. Tried a grinding point, that didn't work, tried a diamond grinding point, seemed a tiny bit better.
Anyone got any tips as to where I'm going wrong, or what attachments are best for miniature work? I have one of the flexible drive shaft attachment which is designed for detail work